Route & fixing survey
We confirm the structure the track fixes to, the mounting angle and the working positions along the route, so the cars lock off where the work actually happens.

Suspended-access rail system · Harken
A CE-certified track-and-car rail that lets a technician move along a structure while attached and lock off at a working position — installed by Apex as a Harken authorised installer.
Harken's Access Rail is a track-and-car system built for one job: letting a person work suspended along a structure with freedom to move and the ability to lock into position. It was designed for the crews of very large yachts working outboard along the hull, and it carries a CE certification Harken describes as unique in the marine industry — the same hard-anodised track and ball-bearing cars Harken makes for sailing hardware, engineered for a human load.
The system is made up of two joined cars that take the personal suspension line and the separate fall-arrest attachment. The cars are machined from one-piece aluminium, run on captive ball bearings held by patented wire retaining clips and composite corner keepers, and lock to the track with a pin-stop that releases easily and re-engages at the next position. Track and cars come in black hardcoat-anodised or clear-anodised finishes for corrosion resistance, and a dedicated car with a wheel-toggle attachment is used where the track is mounted on a brow or an angled surface so the suspension line clears the edge without chafing.
Apex has installed Harken Access Rail where a fixed, repeatable suspended-working route was needed, and is an authorised installer for the system.
Specifications from Harken. Installed and certified by the Fall Protection Division.
| System type | Track-and-car rail for personal suspension with separate fall-arrest attachment |
|---|---|
| Cars | Two linked one-piece solid aluminium cars; pin-stop lock, released to move and re-engaged at the next position |
| Bearings | Captive ball bearings with patented wire retaining clips and composite corner keepers |
| Finish | Black hardcoat-anodised or clear-anodised track and cars |
| Angled mounting | Dedicated car with wheel-toggle attachment for track on a brow or angled surface — suspension overhangs the edge, no chafe |
| Certification | CE |
We confirm the structure the track fixes to, the mounting angle and the working positions along the route, so the cars lock off where the work actually happens.
Track and cars fitted by Apex's manufacturer-trained engineers, with the angled-mount car used wherever the track sits on a brow or sloping surface.
Fixings tested at commissioning, with Harken's documentation, Apex's installation certificate and the inspection date handed over.
Periodic inspection of track, cars, bearings and pin-stops by Apex, with genuine Harken parts for any remedials.
Contact our Fall Protection team today about your project. We aim to respond within 24 hours.