Apex Access Group
Trust. By Design
Apex Access Group — fall protection systems & manufacturers works at height

Fall protection systems we install

The fall protection systems Apex is authorised to install, test and certify — SFS SOTER, FallProtec SecuRope, Fall Angel, Rothoblaas, Genesi and Harken — matched to the roof, the structure and the way it's used.

Which fall protection systems does Apex install?

Apex is an authorised installer for six fall protection manufacturers — SFS, FallProtec, Fall Angel, Rothoblaas, Genesi Protection and Harken — and has installed systems from every one of them. That matters for two reasons. The first is fit: no single range suits every roof, so being able to specify a UK-made SOTER II lifeline on a standing-seam roof, a SecuRope line where fall clearance is tight, a Rothoblaas anchor on a timber structure or a Harken rail for suspended working means the system is chosen for the building rather than the building bent round the system. The second is paperwork: manufacturer warranties and certification depend on installation to the manufacturer's specification by someone they have trained and authorised, and every Apex system is handed over with the manufacturer's documentation, an installation certificate and a BS 7883 inspection date. The systems below are the ones we specify most often; if your building already has a system from another manufacturer, we can usually inspect, test and recertify it under BS 7883 — see Inspection & Testing.

How we deliver.

SFS SOTER II horizontal lifeline

A UK-manufactured horizontal lifeline fitted to the outer roof skin, certified by SATRA to EN 795:2012 Class A and C and CEN/TS 16415 for up to four users in fall arrest, restraint or work positioning. The Slyder traveller passes intermediate brackets and corners without unclipping; the energy-absorbing post yields at 4 kN and keeps the peak load into the roof structure below 6 kN. Fixings for standing-seam, built-up flat, composite and bespoke roofs, and SFS offers a warranty of up to 25 years (1+24) subject to project specification.

View product →

FallProtec SecuRope Neo Pro lifeline

A cable lifeline from Luxembourg certified to EN 795:2012 Type C, CEN/TS 16415 and BS 8610 for up to four users, with up to 15 m between anchors and energy absorbed in orientable intermediate anchors rather than the end posts. Its low cable deflection makes it the pick where fall clearance is limited. Configurations for ground, wall and overhead use, plus standing-seam, sandwich-panel, hot-deck and steel-beam brackets, and a vertical QuickSet variant for ladders and inclined runs.

View product →

FallProtec SecuRail and anchor points

Alongside the cable range, FallProtec's SecuRail rigid lifeline rail gives a hands-free traverse for overhead, horizontal and vertical fall arrest, and a dedicated rope-access rail for suspended working along a facade. Fall arrest, restraint and abseiling anchor points complete the range for tie-back and single-position work.

View product →

Fall Angel roof systems

A UK range built around the roof rather than the lifeline alone: RoofAngel horizontal lifelines for fall arrest and restraint, GuardAngel fixed, freestanding and wall-mounted guardrails, SkyAngel rooflight and fragile-roof protection, WeightAngel non-penetrative weighted anchors for flat roofs and WalkAngel non-slip walkway and step surfaces — to BS EN 795, EN 516 and ACR[M]001.

View product →

Rothoblaas anchor lines and anchor points

An Italian range of anchor lines, anchor points and collective protection with a particular depth in fixings for timber structures — CLT, glulam and timber-frame roofs where a generic steel-deck post won't do. Specified where the roof build-up or the architecture calls for a product engineered around the substrate.

Genesi Protection fall arrest systems

Made in Italy fall arrest systems designed around the different roof morphologies of industrial buildings, backed by the Genesi Academy's work-at-height and confined-space training. Used where an industrial roof needs a system matched to its profile rather than adapted from a flat-roof product.

Harken Access Rail

A CE-certified track-and-car rail system from Harken, built so a technician can move along a structure while attached and lock off at a working position using a pin-stop car. Linked one-piece aluminium cars take the personal suspension and the fall-arrest attachment, with hardcoat-anodised track and cars for corrosion resistance. Apex has installed Harken Access Rail for suspended working where a fixed, repeatable access route is needed.

View product →

Where we deliver.

Having six ranges to draw on means the system is matched to the roof or structure, not the other way round. Apex installs across the UK on:

  • Standing-seam metal roofs
  • Built-up flat & single-ply roofs
  • Composite & sandwich-panel roofs
  • Timber, CLT & glulam structures
  • Concrete & structural steel
  • Green roofs
  • Facades & soffits
  • Industrial plant & walkways

FAQs.

Is Apex an authorised installer?
Yes. Apex is an authorised installer for SFS, FallProtec, Fall Angel, Rothoblaas, Genesi Protection and Harken, and has installed systems from each of them. Installation by an authorised installer to the manufacturer's specification is normally a condition of the manufacturer's warranty and certification, so it's worth checking before any fall protection system goes in.
Which lifeline system is right for my roof?
It depends on the roof build-up, the fall clearance beneath the edge, how many people use the system at once and how often. As a rule of thumb: SFS SOTER II on standing-seam, composite and built-up flat roofs where a UK-made system with a long warranty is wanted; FallProtec SecuRope where clearance is tight or spans are long; Fall Angel where guardrails, rooflight protection and walkways are needed alongside the lifeline; Rothoblaas on timber structures; Genesi on industrial roof profiles; and a rail system where a hands-free or suspended traverse is needed. The survey settles it — we'll tell you which and why.
Does using an authorised installer affect the warranty?
Usually, yes. Manufacturers tie their warranty to installation to their specification by someone they have trained and authorised, and to the system being inspected on time afterwards. SFS, for example, quotes a warranty of up to 25 years (1+24) on SOTER II subject to the project specification. Apex hands over the manufacturer's documentation, the installation certificate and the BS 7883 inspection date so the warranty starts on the right footing.
Can you inspect or recertify a system from a manufacturer not listed here?
In most cases, yes. Periodic inspection under BS 7883 applies to any BS EN 795 anchor system, whoever made it. Where a system needs manufacturer-specific replacement parts or a manufacturer's own recertification, we'll say so at the survey rather than discover it on the roof.
Do you supply the systems as well as install them?
Yes — Apex specifies, supplies, installs and certifies the system as one package, so there's one point of responsibility for the design, the fixings into the structure and the handover documentation. If you already have a system specified by an engineer or architect, we install to that specification.

Talk to our Fall Protection team about systems & manufacturers

Contact our Fall Protection team today about your project. We aim to respond within 24 hours.

  1. 1Contact
  2. 2Project
  3. 3Details