Nottingham's centre mixes Victorian warehouses and heritage buildings with newer offices and flats, and much of its waterfront sits directly over the canal, where scaffold and suspended platforms are awkward or impossible. Rope access lets a small team work those elevations from above and leave the towpath, water and street below clear.
At Castle Wharf we carried out concrete and masonry repairs to the British Waterways Building's canal-side elevation for Jessops Construction, reforming lintels and stabilising structural elements with thixotropic injection resins, all from rope above the water. At Longs Mill in Derby we rebuilt a heritage parapet in lime mortar to stop water ingress into the apartments below, and at a waste facility in Sutton-in-Ashfield our fall protection team installed a 7.2m caged ladder and a 70m horizontal lifeline.
Nottingham is one of the nearest cities to our base in Matlock, so surveys, RAMS and mobilisation are quick to arrange. The same team plans and delivers the work, and rope access is supervised on site by an IRATA Level 3 technician, as the IRATA code of practice requires.
Critical masonry and concrete repairs to the British Waterways Building's canal-side elevation, delivered entirely on rope.
Read more
Specialist de-vegetation and parapet rebuild to resolve water ingress on a heritage mill conversion.
Read more
Rope access install of three illuminated flexface signs at TJ Morris's Doncaster distribution centre: two 17.2m Home Bargains faces and a 10m oval.
Read more
Three high-level illuminated tray signs installed post-construction on a fully occupied building using temporary anchorage.
Read more
Two 3m-high individual flex face letters installed at Revolut's new Canary Wharf office — heavy-lift sections in excess of 900kg, mixed BMU and rope access.
Read more
Annual de-vegetation and brickwork de-scaling on a 13-arch viaduct spanning an active holiday park.
Read more
Two sets of illuminated built-up lettering installed during the live construction phase, with bespoke temporary anchorage.
Read more
Brand rollout on a fully operational student accommodation building in Birmingham — built-up signage, contra-vision vinyl and large-format banners.
Read moreHigh-level signage installation, maintenance and refurbishment — illuminated, branded and architectural — delivered by IRATA-certified rope access teams.
More on signage & display →Pre-design surveys for signage manufacturers, brand teams and architects — capturing crucial dimensions, fixing details, existing electrical feeds and any access constraints that affect signage installations. Photo-mapped reports inform the manufacturer's design package and de-risk the install. Particularly useful on national rebrand rollouts where traditional access methods aren't viable.
Large-format banner, mesh and wrap installation for marketing campaigns, stadium event programmes, construction projects and scaffold wraps. Rapid out-of-hours mobilisation on retail rebrands, product launches and time-critical event windows. Reversible install on facade and scaffold structures.
Installation of fabricated signage at height — built-up letters, dimensional logos, halo-lit and front-lit illuminated cabinets, channel letters and architectural lettering. Mounted to facades, parapets, lobby walls and rooftops across commercial, hospitality, retail and stadium estates.
Installation of flexface and tensioned-fabric sign systems both internally and externally — facade-mounted illuminated panels, lobby and atrium feature signage, stadium interiors and retail signage. Covers new installs, skin replacement on existing systems and rebrand-driven refurbishment.
Upgrade of legacy fluorescent and halogen-lit signs to LED — reducing the building's energy load and the sign's maintenance interval. New control gear and LED modules supplied as part of the retrofit.
Scheduled rope-access inspection programmes for signage estates — photographic survey of every fixing, cleaning, electrical safety test and a maintenance schedule covering planned and reactive intervention.
High-level signage installation, maintenance and refurbishment — illuminated, branded and architectural — delivered by IRATA-certified rope access teams.
More on signage & display →Pre-design surveys for signage manufacturers, brand teams and architects — capturing crucial dimensions, fixing details, existing electrical feeds and any access constraints that affect signage installations. Photo-mapped reports inform the manufacturer's design package and de-risk the install. Particularly useful on national rebrand rollouts where traditional access methods aren't viable.
Large-format banner, mesh and wrap installation for marketing campaigns, stadium event programmes, construction projects and scaffold wraps. Rapid out-of-hours mobilisation on retail rebrands, product launches and time-critical event windows. Reversible install on facade and scaffold structures.
Installation of fabricated signage at height — built-up letters, dimensional logos, halo-lit and front-lit illuminated cabinets, channel letters and architectural lettering. Mounted to facades, parapets, lobby walls and rooftops across commercial, hospitality, retail and stadium estates.
Installation of flexface and tensioned-fabric sign systems both internally and externally — facade-mounted illuminated panels, lobby and atrium feature signage, stadium interiors and retail signage. Covers new installs, skin replacement on existing systems and rebrand-driven refurbishment.
Upgrade of legacy fluorescent and halogen-lit signs to LED — reducing the building's energy load and the sign's maintenance interval. New control gear and LED modules supplied as part of the retrofit.
Scheduled rope-access inspection programmes for signage estates — photographic survey of every fixing, cleaning, electrical safety test and a maintenance schedule covering planned and reactive intervention.
Specialist fire-safety works at height — sprinkler heads, intumescent coating, fire-stopping, aspirating detection and EWS1-relevant cladding inspection on industrial warehousing, production and distribution facilities.
More on fire protection →Inspect, test, repair, replace or install sprinkler heads, pipework, hangers and bracketry at height — in high-bay warehouses, racking voids, plant rooms and atria. Like-for-like head campaigns, retrofit upgrades, and rope-access delivery of the high-level installation portion on new systems alongside the principal M&E contractor and fire engineer.
Install, test and maintain aspirating smoke detection (ASD) systems at height — racking voids, atria, data centres, cold storage and high-clean environments where conventional point detection isn't viable. Pipework runs, sampling-point positioning and commissioning to the manufacturer's sensitivity spec, delivered without scaffold or MEWPs.
Application of intumescent fire-protection coatings to exposed structural steel at height — primary beams, portal frames and columns. Suitable for new-build, retrofit and remedial work where original coatings have degraded.
Restoration of compartment integrity at riser, service and facade penetrations. Approved fire-stopping products — intumescent collars, fire-rated batt, mastic — applied to manufacturer's specification, with photographic records of every penetration and a certified handover pack.
Close-quarter cladding inspections at height — cavity barriers, fire-stopping, panel composition, fixings and fire-spread risk. Photographic survey packs with elevation drawings and detailed close-ups. Supports RICS EWS1 form completion on residential blocks within mixed industrial portfolios.
Install, align and maintain optical beam smoke detection systems in large open spaces where point detectors aren't suitable — warehouses, atria, sports halls and high-bay industrial buildings. Transmitter and reflector positioning, beam alignment and ongoing test access delivered without scaffold or MEWPs.
Rope-access delivery of the high-level installation portion on oxygen reduction (hypoxic) fire-prevention systems — pipework runs, distribution diffusers and instrumentation in protected spaces such as data centres, cold storage, archives and high-value warehousing. Working alongside the principal contractor and fire engineer.
Working-at-height access for principal contractors and subcontractors. Apex undertakes the tasks on live construction projects that traditional access — scaffold, MEWPs, mast-climbers — can't reach.
More on construction →Closing out the punch-list at height to the principal's snagging schedule — facade fixings, finishing items, signage rectification, general defect closeout. Photographic record of every item, signed off against your schedule.
Sealant application and replacement on glazing, cladding panels, expansion joints, parapets and balcony interfaces. Approved products to the architect's specification, with installer certificates.
Failed unit replacement, gasket renewal and water-ingress remediation on facade glazing and curtain wall systems. Closed out without re-erecting facade access.
Defective fixings, panel-edge work, weather-damage repair and targeted refit on rainscreen, unitised and composite cladding systems — without scaffold or MEWPs.
Facade, glazing and frame clean-down at the end of a live build, ready for handover. Pure-water systems for streak-free results on glazed elevations.
High-level MEP penetrations and terminations, finishing-trade support, perimeter and penetration fire-stopping. Apex supplies the rope-access leg; the subcontractor keeps ownership of the trade.
Reactive remediation of facade-related defects identified after handover. Sealant failures, fixing loosening, weather damage — closed out without re-erecting access.
Rope-access safety netting for structures MEWPs and scaffold can't reach — stadiums, bridges, swimming pools, atria and industrial roofs. FASET-aligned installation, inspection and removal.
More on safety netting →Collective fall-arrest catch nets rigged beneath the work area to BS EN 1263 — the primary protection for roofers, steel erectors and trades working at height, installed on rope where access platforms and MEWPs can't reach.
Fine-mesh debris netting overlaid on the catch net or fixed to the structure to contain offcuts, small debris and dropped tools — protecting people, vehicles and the public on occupied sites and over live areas below.
Tensioned walk-on nets that double as a safe working platform — a stable surface to work from in voids, roof spaces and over-water structures where a fixed platform, cradle or MEWP can't be positioned.
FASET-standard competent-person inspections to BS EN 1263-2 — weekly while nets are in service, with defect logging and certification for the principal contractor's H&S file. Available on our own installs or as a standalone service.
Rope access on Network Rail and National Highways structures — critical infrastructure inspection, repairs and maintenance.
More on road & rail →Visual and detailed examinations of Network Rail structures. Working in partnership with examination contractors, we provide rope-access support — close-quarter abseil access on STE07 detailed examinations of bridges, viaducts and rail structures, integrated into the examination team so the close-quarter scope lands within the possession.
Spalling repair, crack injection, localised concrete patching and lime-mortar repointing on reinforced concrete and masonry highway and rail structures. Cathodic-protection installation where corrosion is structural. Delivered by the same in-house team that did the inspection — one supplier across the inspection-to-remedial cycle.
Principal and general inspections of National Highways structures (CD350). Working in partnership with inspection contractors, we provide rope-access support — close-quarter abseil access on principal inspections of bridges and viaducts where MEWP and scaffold aren't viable, integrated into the inspection team and planned around the TM window.
Inspection, lime-mortar pointing, drainage clearance and surface repair on rail and highway retaining walls and culverts. Crack-monitoring and structural-movement reporting where required. Rope access reaches the wall face directly — no need for the scaffold or boat access that retaining-wall inspection traditionally needs.
Rope-access clearance of vegetation from rail embankments, cuttings and viaduct faces — controlling root ingress that damages brickwork and maintaining lineside visibility. Cyclical maintenance under Network Rail's vegetation management regime; reactive clearance after weather events on highway slopes. Brickwork de-scaling on the same visit where required.
Inspections and remedial works on tunnel portals, ventilation shafts and adjacent masonry — under possession on rail, under TM and confined-space protocols on highway. Teams carry confined-space tickets where the shaft scope crosses into permit-required entry.
Specialist high-level cleaning — building, heritage and industrial — where access from below isn't viable.
More on cleaning →Routine and post-construction window cleaning on commercial and residential envelopes. Pure-water systems for streak-free results on glazed facades, atria and roof glazing.
Stone, brick, metal and glazed facade cleaning — including removal of atmospheric pollutant and traffic staining. Methods matched to the substrate, with no damage to original finishes.
Low-pressure superheated steam cleaning for masonry & stone.
Pressure and soft-wash cleaning on facades and render. Soft-wash chemistry where pressure would damage the substrate.
Reactive graffiti removal and the application of sacrificial and permanent anti-graffiti coatings to vulnerable elevations.
Removal, decontamination and sanitisation of bird-fouled high-level surfaces — infection-control compliant. Followed by netting or spike installation to prevent return.
Industrial vacuum cleaning of beams, trusses, ductwork and steelwork. Hygiene-driven cleans in food, pharma and manufacturing facilities where dust is a contamination risk.
Specialist dust removal in flour mills, granaries, silos and processing plants where conventional cleaning can't reach combustible deposits on internal steelwork.
Specialist repair works at height — stone, lime mortar, leadwork, timber and traditional craft, delivered scaffold-free by rope access.
More on conservation →Many church towers, spires and high parapets sit beyond the safe reach of a quinquennial or condition inspection carried out on foot or by ladder. Rope-access technicians provide close-up visual inspection of this high-level fabric — recording loose masonry, failed pointing, cracked stone and defective lead — and supply a referenced photographic record for the inspecting architect or surveyor to fold into the quinquennial (QI) or condition report. We provide the access and the findings; the appointed inspector retains the report.
Close-up survey of the elevation to scope the defects and agree the repair methods. Test patches taken for any new method (cleaning, mortar mix, paint system), with method statements and material specifications issued before works begin.
Consolidation of weathered, spalling or delaminating stone. Indent repair using salvaged or quarry-matched stone, set in lime mortar. Suitable for sandstone, limestone, granite and individual ashlar units.
Repointing using lime mortars matched to the original — NHL 2, 3.5 or 5 hydraulic lime, or non-hydraulic lime putty with aggregate matched to the historic mix. Joint geometry returned to the original profile.
Traditional cast-lead and milled-lead detailing on roofs, parapets and rainwater goods — valleys, flashings, hoppers and coverings, worked to suit the building and the wider repair scope.
Replacement of slipped, cracked or missing slates and tiles, re-bedding and re-pointing of ridge and hip lines, and renewal of the lead flashings around them. Rope access reaches steep, high or awkward roof slopes — church roofs, towers and tall pitched elevations — without scaffold or a roof-edge platform, putting isolated defects right before they let water in.
Splice, scarf and full-section repair of timber sashes, frames and decorative joinery on a building's facades. Appropriate paint systems (including linseed-oil paints and traditional gloss) where required.
Contact our Rope Access team today about your project. We aim to respond within 24 hours.
